RH (Customer) asked a question.
Click Plus help getting started
To learn PLC programming, I purchased a Click Plus C0-01AC, C2-01CPU and C0-04AD-2. It bothers me that the little LED on the C0-04AD-2 (circled in red) is not lit up. Being an absolute beginner, I am not sure what to expect.
You are missing 24V & 0V to the two bottom terminals on the module itself.
Thank you. I will try that and report back.
Just know it's best the 24V for that module should not come from the Click's power supply. I/O should always be powered by a separate unit.
Ok, I bought a power supply and am hooking it up now
It is working now - thanks
Hi RH,
To help get you started with the Click PLC here is a series on this controller. It may give you a few ideas.
https://accautomation.ca/series/click-plc/
Regards,
Garry
Thanks, I see you have several videos that look like just what I am looking for, I will let you know or my progress
Thank you for putting together those videos. I was able to successfully perform the potentiometer tutorial. Well done!
Hi RH
Thanks for the update.
I'm glad I was able to help.
Garry
https://accautomation.ca/
I will feel sorry for that CLICK if you (or some wiring gremlin) gets your wire colors mixed up.
Your have black as Line/Live and GND.
I have destroyed a couple. Just a heads-up.